 |
工作条件Working candition
AP型系统最高压力1.6mpa、即泵的吸入口+迸扬程<=1.6mpa，如用户要求系统高于1.6mpa时，
可在订货时提出。
AP型屏蔽泵主要输送清水或物理化学性质类似于水的其它介质。AP型屏蔽泵介质温度不超过150°C
The Maximum processing Pressure ofAp mode is 1.6MPa;i.e suction pressure + life(1.6Mpa.if customers'requiring pressure is higher than 1.6Mpa,it can be ordered.)
|
|
AP mode canned pump is applied mainly of pumping cleaning water or th physical chemical property of other medium that's similar to water.The operation temperature ofAP model can't be over 150°C.
|
型号及结构说明 Explanation of model an structure
|
|
|
|
 |
| 结构说明 Instruction to the Structure |
| 1 |
泵体 Pump Casting |
| 2 |
叶轮 Impeller |
| 3 |
下轴承座 Bottom Bearing Chuck |
| 4 |
电机接线盒 Motor Terminal |
| 5 |
电机壳体 Motor casing |
| 6 |
轴承 Bearing |
| 7 |
推力盒 Thrusing Disc |
| 8 |
定子总成 Stator Assembly |
| 9 |
转子总成 RotorAssembly |
| 10 |
定子屏蔽套 Stator Canned Cover |
| 11 |
上轴承座 Upper Bearing Shuck |
| 12 |
转子端盖 Rotor Ending Cover |
| 13 |
转子屏蔽套 Rotor Canned Cover |
| 14 |
轴套 Sleeve |
| 15 |
泵盖 PumpCover |
| 16 |
冷却水管部件 Colling WaterPiping Accessories |
| 17 |
轴 Shaft |
|
|
|
|
